Ground anchor Wickey SimpleLock (set of 10) Ground anchor Wickey SimpleLock (set of 10)
With the Wickey Safety ground anchors you can easily embed your climbing frame or swing scaffold in the ground. For stable fastening, the hot-dip galvanized ground anchors must be embedded in concrete. The anchors are suitable for post thicknesses of 7x4.5 cm and 9x4.5 cm as well as for thicker posts measuring 7x7 cm and 9x9 cm. The anchors can be easily screwed to the inner sides of the posts and are almost invisible from the outside.
Galvanised anchor with splayed end
Dimensions 40x3 x0.4 cm
Incl. 20 hexagon head wood screws Ø7x65 mm, 20 washers, 20 safety caps
Product weight 4.5 kg
Post thicknesses 7x4.5 cm, 9x4.5 cm, 7x7 cm and 9x9 cm
Set for setting in concrete
Perfect for climbing frames with sand pits, ground anchors mount on the inside
Quality and safety tested
All stated dimensions are approximate
Anchor name SolidLock
Suitable posts ≤ 9x9 cm
≤ 9x9 cm
Tiny & Flyer series
Smart & Prime series
Suitable for all soil conditions
Loose, sandy soil
Firm, stony ground
Two-sided attachment to the post
Support plate included*
Mounting on the inside possible**
Quick and easy assembly
We recommend that all our anchors are concreted into position
* Stabilises the posts
** Anchor not visible from outside
Tips & Tricks
Install the play tower and place it on the space designated. Please keep a safe distance in accordance with the installation instructions.
Mark all post of the tower on the ground and dig frost-proof holes (Ø30 x T70 cm) into the soil.
Place the play tower and install all the anchors, if possible on the hidden side.
Support the anchor with stones or the play equipment with wooden wedges until the play tower is horizontal.
Pour concrete up to about 10 cm below the surface. When the concrete is dry, the remaining hole can be filled with topsoil.